What Is an Aerosol or Spray for Electronics Use?
In the electronics industry, an aerosol, spray, espray, or sprayer refers to a product that comes in the form of a fine mist contained in a pressurized container with a gas. Aerosols for electronics are used for a variety of applications, such as cleaning, lubrication, corrosion protection, heat dissipation, and sealing in electronic components and devices.
Some common examples of aerosols used in the electronics industry include:
Contact Cleaners:
Also known as zero-residue contact cleaners.
These are a type of electronic contact cleaner promoted as a solution that leaves no residue after use. This means that when this type of product is used to clean electrical contacts and electronic components, it doesn't leave any trace of substances or residues that can interfere with the operation of devices or cause long-term corrosion problems.
These zero-residue contact cleaner aerosols are formulated to be highly effective in removing dirt, grease, rust, and other contaminants from electrical contacts and connections but without leaving any chemical residue on the surface after the aerosol liquid evaporates.
The advantage of zero-residue contact cleaners is that they are ideal for applications where thorough cleaning and surface purity are critical. For example, in the semiconductor industry or aerospace applications, where even small amounts of residue can cause operational issues or long-term degradation, these products can be essential.
Lubricant Sprays:
Lubricant aerosols are applied to moving parts within electronic devices to reduce friction and wear, which can improve durability and performance. They are frequently used in electronics for maintaining moving parts or components.
Types of Lubricant Aerosols:
Non-Dielectric Lubricants:
Non-dielectric lubricants are those that can conduct electricity or allow the transmission of electric current through them. Unlike dielectric lubricants, which are electrical insulators, non-dielectric lubricants may have specific applications in the electronics industry. Some applications where non-dielectric lubricants are used include:
Potentiometers and sliders: In some electronic components, such as potentiometers and sliders, conductive lubricants are used to ensure a stable electrical connection while allowing smooth and seamless movement.
Moving electrical contacts: In devices involving moving electrical contacts, such as switches, relays, and connectors, non-dielectric lubricants are sometimes applied to reduce friction and wear, which can enhance the lifespan and performance of these components.
Dielectric Lubricants:
A dielectric lubricant is a type of lubricant specifically designed for use in electrical or electronic applications where maintaining electrical integrity and preventing electrical conduction through the lubricant is important. Dielectric lubricants are electrical insulators and possess insulating properties.
These lubricants are used in a variety of situations, such as lubricating electrical or electronic components exposed to moisture or humid environments. Some common applications include:
-
-
- Lubrication of switches: Dielectric lubricants are often applied to electrical switches to reduce friction and extend the switch's lifespan.
- Protection of electrical connections: They are used to protect electrical connections by preventing corrosion and providing electrical insulation in humid or corrosive environments.
- Sensitive electronic components: In electronic components that require lubrication, such as potentiometers or sliders, dielectric lubricant is used to prevent short circuits and ensure smooth operation.
- Submersible or outdoor components: In applications where electrical components are exposed to water or humidity, dielectric lubricants help prevent moisture and corrosion.
Dielectric lubricants are resistant to most chemicals, are non-conductive of electricity, and have high dielectric strength, making them suitable for use in applications where electrical conductivity must be avoided at all costs.
Contact Cleaners with Lubrication:
Although it may seem contradictory, it is very common to need the spray to perform both functions. For example, in rotary switches, potentiometers, and other movable parts, products are needed that not only clean but also leave a fine layer of lubricant to help the moving parts function without extra stress due to friction that could ultimately damage them. In some cases, manufacturers develop different products with varying degrees of lubrication depending on the objective. As lubrication increases, the cleaning property decreases, reducing the residue left by this fine layer.
Protective Coatings:
Also known as tropicalizers, these coating aerosols are used to apply a protective layer on printed circuit boards and other components to shield them from moisture, corrosion, and contamination. There are different types:
Polyurethane: Polyurethane or urethane coating aerosols create a transparent and resilient film on electronic components. They are suitable for protection against moisture, corrosion, and dust. They are suitable for various applications in the electronic and electrical industry, including protecting printed circuit boards (PCBs), connections, cables, and other components.
Acrylic: Acrylic coating aerosols are similar to polyurethane ones but may be easier to remove if repairs or modifications are needed in the future. They also offer good protection against moisture and dust. Acrylic coating aerosols are used to provide a protective layer on electronic components to safeguard them against humidity, corrosion, and other environmental factors. These aerosols are transparent and provide an effective barrier without significantly affecting the electrical characteristics of the components. Acrylic coating aerosols are common in the electronic and electrical industry and are suitable for applications such as protecting PCBs, electrical connections, cables, and other components exposed to harsh environments.
Silicone: Silicone coatings are flexible and resistant to extreme temperatures. They are effective in protecting electronic components in environments where resistance to high and low temperatures is required. They are often used to create a lubricating effect on the applied surface while resisting high temperatures. Sometimes they are used on the metal surfaces of electric irons to enhance their sliding properties.
The choice of the type of coating aerosol or tropicalizer will depend on the specific needs of the application, the required resistance to environmental factors, and the electrical properties of the electronic components. It is important to follow the manufacturer's recommendations and application standards to ensure effective and safe protection of the components.
Cooling Sprays:
Also known as Freeze spray. Some cooling sprays are designed to aid in heat dissipation by applying a fine mist that cools the component and helps pinpoint the part or area experiencing elevated temperatures more accurately. This type of product is used to rapidly cool electronic components or specific areas of a device by temporarily freezing the surrounding air.
Adhesives and Sealants:
Adhesive and sealant aerosols are used to securely bond components or hermetically seal electrical connections.
Mold Release Agents:
These aerosols are applied to plastic injection molds and other manufacturing tools to facilitate the release of molded parts without damaging them.
Types of Contact Cleaners and/or Lubricants? Where Are They Used?
Ultimately, depending on the application, it may be necessary to combine contact cleaning and fine lubrication. This is why many lubricants used in electronics combine both functions. As lubrication degree increases, cleaning power decreases, reducing the residue left by this fine layer.
Uses of contact cleaners and lubricants sprays:
Zero-residue contact cleaners or fine lubricants with contact cleaning properties are used in a variety of applications in the electronic and electrical industry. These products are especially useful when precise and effective cleaning of electronic components or electrical contacts is required without leaving any residues. Some common uses include:
Cleaning electrical contacts: Zero-residue contact cleaners are used to remove dirt, dust, grease, residues, and rust from electrical contacts, such as switch contacts, connectors, and sockets, ensuring a reliable electrical connection and reducing electrical resistance.
Maintenance of electronic equipment: These products are useful for the maintenance of electronic equipment such as computers, printers, audio and video equipment, as well as for cleaning contacts on printed circuit boards, memory cards, and other components.
Electronic repairs: During electronic component repairs or soldering work, fine lubricants with contact cleaning properties can help clean contacts before and after soldering, ensuring strong electrical connections.
Cleaning components in critical environments: In applications where any residue could cause operational problems, such as in the aerospace industry or semiconductor manufacturing, zero-residue contact cleaners are used to ensure precise and complete cleaning without leaving traces of chemicals.
Rust removal: Fine lubricants with contact cleaning properties can also help remove rust and corrosion layers from metal components, restoring electrical conductivity.
In summary, zero-residue contact cleaners and fine lubricants with contact cleaning properties are versatile and used in various situations where efficient and residue-free cleaning is needed for electronic or electrical components. The choice of the product will depend on the specific requirements of your application. Always follow the manufacturer's recommendations for safe use.