Stock | Quantity | |
---|---|---|
2 |
The TF02-i is a single point LiDAR sensor, based on the TOF principle. It is the updated version based on TF02-Pro. The communications interface has been optimized and the power supply voltage has a wide range and has polarity inversion protection. In addition, the degree of protection against dust and water is IP65, which makes it ideal for industrial applications.
There are two different models depending on the communications protocol: either via RS-485 or CAN bus. In this case, this reference is the one that works with RS-485 protocol communications.
Power: 7 to 30 Vdc
Consumption: ≤0.8W (12V)
Current: ≤65 mA (100 mA peak at 12V)
Range: 0.1 to 12 meters max (*depending on reflectivity of object to be detected)
Immunity to ambient light: 70 Klux
Detection angle (FoV): 2°
Accuracy: ±6 cm (0.1 to 6 m) and ±2% (of 6 to 12 m )
Resolution: 1 cm
Wavelength: 850 nm
Frame rate: Adjustable 1..1000 Hz (default setting at 100 Hz)
RS-485 interface:
Baud rate: 115200
Data bits: 8
Stop bit: 1
Parity: none
Operating temperature: -20°C to +60°C
Dimensions: 50 x 34 x 41mm
Weight: 52g
Cable length: 70cm
LCHR010