TOTAL 0.00€  
You are in Home | Products | Sensors | Magnetic Field Sensors | Sparkfun ACS723 - 5 A Current Sensor

Sparkfun ACS723 - 5 A Current Sensor

Ref. SSMG712

Sparkfun ACS723 - 5 A Current Sensor
Sparkfun ACS723 - 5 A Current Sensor
Sparkfun ACS723 - 5 A Current Sensor
Sparkfun ACS723 - 5 A Current Sensor
Disponible Available

Version with amplifier

The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC Current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the Current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!

The SparkFun Current Sensor Breakout measures both DC and AC Currents all the way up to 5A, has full electrical isolation of measured and sensed circuits, and has a base sensitivity of 400mV/A. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board.

Note: Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.

Allegro Chip ACS723

Measuring range: 5 amps


ACS723 Data sheet

Wiring diagram

Products that could interest you
facebook google + youtube linkedin twitter
All rights reserved © 2018 Electrónica Embajadores
Sparkfun ACS723 - 5 A Current Sensor ("SEN-0025","1187","sen-08883","SEN-14544")
SEN-0025,1187,sen-08883,SEN-14544, magnetic field sensors, buy magnetic field sensors, shop for magnetic field sensors, sensors, buy sensors, shop for sensors

Cookies privacy

We use own and third party cookies to facilitate navigation. By continuing with navigation we understand that our


Phase 0: We have decided to reopen taking all security measures. The customer service hours will be normal. You can check here.
The maximum capacity in the premises is 6 people, groups of 2 or more people are not allowed.
A maximum of 3 public service posts are set, with 2 m of separation between them and there are separation with the public, an ozone generation team, all our operators will wear safety PPE and the use of hydroalcoholic gel is offered at the entrance of the premises. It is recommended that they come with mask protection and gloves. Self-service is not allowed: NO SELF-SERVICE

Cookies policy.