This product is not currently in stock in our store. However, it can still be purchased and will be shipped directly from the manufacturer.
This 2000VA Line Interactive UPS is designed to deliver high-level electrical protection for computer equipment, electronic systems and critical devices against power outages, micro interruptions, voltage spikes and electrical fluctuations. Its high capacity makes it an ideal solution for professional environments with greater power and backup requirements.
Thanks to its Line Interactive technology with boost & buck AVR, the system provides automatic voltage regulation, effectively correcting overvoltage and undervoltage conditions without constantly using the battery. The simulated sine wave output ensures compatibility with small and medium-sized servers, workstations, network equipment and sensitive electronics.
This line interactive UPS for professional environments features advanced microprocessor control with internal self-diagnostics and continuous system monitoring. It includes cold start, automatic restart after mains recovery and intelligent battery charging, optimising performance and extending battery life.
The 2000VA line interactive UPS is equipped with an LCD display that provides real-time information on input and output status, load level, battery level, voltage values and system alarms. It also includes USB or RS232 communication ports and RJ45 surge protection, allowing easy integration into IT and telecommunications infrastructures.
With its combination of power, autonomy and robust design, this 2000VA Line Interactive UPS is ideal for technical offices, IT infrastructures, servers, critical IT equipment and network systems requiring reliable power continuity.
| Model | KUTIN 2000 |
| Capacity | 2000 VA / 1200 W |
| Nominal input voltage | 220/230/240 Vac |
| Input voltage range | 162~290 Vac |
| Voltage regulation (battery mode) | ±10% |
| Frequency (battery mode) | 50/60 Hz ±1 |
| Transfer time | Typical 2–6 ms, maximum 10 ms |
| Waveform (battery mode) | Simulated sine wave |
| Number of Schuko outlets | 4 |
| Battery voltage | 48 Vdc |
| Battery | 9 Ah x 4 |
| Typical recharge time | 6–8 hours to 90% capacity |
| Typical backup time at 50% and 70% load | 10 minutes |
| LCD display | AC mode, battery mode, load level, battery level, input voltage, output voltage, overload, fault and battery low |
| Alarms | Battery mode, battery low, overload, battery replacement, fault |
| Communication port | USB or RS232 (supports Windows 2000/2003/XP/Vista/2008, Windows 7, Linux, Unix and macOS) |
| Humidity | 0–90% RH at 0–40 °C (non-condensing) |
| Noise level | <55 dB |
| Dimensions (W x D x H) | 436 × 145 × 212 mm |
| Weight | 23.0 kg |
| Safety standards | IEC/EN 62040-1, IEC/EN 60950-1 |
| EMC compliance | IEC/EN 62040-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8 |
