output current selectable by DIP switches between 5 ranges between 350ma and 1050ma. Besides it´s dimable through PWM or the signal from 0 to 10V or the external potentiometer
180-295 VAC input only
built-in active PFC function
protection against: short circuit / overvoltage / over-temperature
cooling: free air convection
fully isolated plastic case
Class II power unit, no FG (frame ground)
built-in 0-10 VDC and PWM signal dimming function
built-in 12 V / 50 mA auxiliary output
IP20
logarithmic or linear dimming curve selectable (meets IEC62386-207)
temperature compensation by external NTC thermistor (not incl.)
no-load power consumption: < 1 W
power supply synchronization function up to 10 units
suitable for indoor LED lighting applications
3 years warranty
output:
selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA
DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V
rated power: 42 W
ripple current: ± 5.0 %
ripple & noise (max.): 700 mVp-p
no-load output voltage (max.): 110 V / 65 V
current accuracy: ± 5.0 %
setup, rise time: 500 ms, 80 ms / 230 VAC at rated power
hold up time (typ.): 16 ms / 230 VAC at rated power
input:
voltage range: 180-295 VAC 254-417 VDC
frequency range: 47-63 Hz
power factor (typ.): 0.975 / 230 VAC; 0.96 / 277 VAC at rated power
total harmonic distortion: lower than 20 % when output load is 75 % or higher
efficiency (typ.): 91 %
AC current (typ.): 0.23 A / 230 VAC; 0.2 A / 277 VAC
inrush current (typ.): cold start 20 A (twidth = 260 µs measured at 50 % Ipeak) at 230 VAC
leakage current: < 0.5 mA / 240 VAC
protection:
short circuit: constant current limiting, recovers automatically after fault condition is removed
overvoltage:
110-130 V
protection type: shut down output voltage, re-power on to recover
over-temperature: shut down output voltage, re-power on to recover
functionality:
auxiliary power: 12 V @ 50 mA for driving fan; tolerance ± 5 %
temperature compensation: by external NTC thermistor (not provided with the power supply)
dimming
synchronization
environment:
operating temperature: -30 to +60 °C
operating humidity: 20-90 % RH non-condensing
storage: -40 to +80 °C, 10-95 % RH
temperature coefficient: ± 0.03 %/°C (0-50 °C)
vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
safety & EMC:
safety standards: UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved
withstand voltage: input to output: 3.75 kVAC
isolation resistance: input to output: 100 Mohm / 500 VDC / 25 °C / 70 % RH
EMC emission: compliance to EN55015, EN61000-3-2 Class C ( 40 % rated power); EN61000-3-3
EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2 kV), criteria A
others:
MTBF: min. 260,600 h; MIL-HDBK-217F (25 °C)
dimensions (L x W x H): 123.5 x 81.5 x 23 mm
packing: 0.24 kg; 54 pcs / 15 kg / 1.12 ft