protections: short circuit / overload / over voltage
cooling by free air convection
LED indicator for power on
100% full load burn-in test
105 °C extended liftetime electrolytic capacitors
withstands 300 VAC surge input for 5 seconds
high operating temperature up to 70°C
withstands 5 G vibration test
high efficiency, long life and high reliability
3 years warranty
for professional use only
This Device must be installed by a qualified person.
output:
DC voltage: 5 V
rated Current: 26 A
Current range: 0 ~ 26 A
rated power: 130 W
ripple & noise (max.): 80 mVp-p
voltage adj. range: 4.75 ~ 5.5 V
voltage tolerance: ± 2.0%
line regulation: ± 0.5%
load regulation: ± 1.0%
set up, rise time: 800 ms, 20 ms / 230 VAC - 1200 ms, 30 ms / 115 VAC at full load
hold up time (typ.): 28 ms / 230 VAC - 20 ms / 115 VAC at full load
input:
voltage range: 88 ~ 132 VAC / 176 ~ 264 VAC selected by switch 248 ~ 373 VDC(withstand 300 VAC surge for 5 sec. without damage)
frequency range: 47 ~ 63 Hz
efficiency (typ.): 78 %
AC Current (typ.): 3 A / 115 VAC - 2 A / 230 VAC
inrush Current (typ.): cold start 40 A / 230 VAC
leakage Current: < 2 mA / 240 VAC
protection:
overload:
110 ~ 150% rated output power
protection type: hiccup mode, recovers automatically after fault condition is removed
over voltage:
5.75 ~ 6.75 V
protection type: hiccup mode, recovers automatically after fault condition is removed
environment:
working temperature: -25 ~ +70°C
working humidity: 20 ~ 90% RH non-condensing
storage temperature, humidity: -40 ~ +85°C , 10 ~ 95% RH
temperature coëfficient: ± 0.03 % / °C (0~50°C)
vibration: 10 ~ 500 Hz, 5 G 10 min./ 1 cycle, period for 60 min. each along X, Y, Z axes
safety & EMC:
safety standards: UL60950-1, TUV EN60950-1 approved
withstand voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
isolation resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMI conduction & radiation: compliance to EN55022 (CISPR22) class B
harmonic Current: compliance to EN61000-3-2,-3
EMS immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
others:
MTBF: 244,000 h, MIL-HDBK-217 F (25°C )
dimensions (L x W x H): 199 x 98 x 38 mm