Available
The RTK-1010 is a high-performance dual-band GNSS RTK module that designed for applications requiring centimeter level positioning accuracy. It adopts 12 nm process and integrate efficient power
management architecture to perform low power and high sensitivity. The module supports concurrent
reception of GPS, GLONASS, BeiDou, GALILEO, and QZSS to improve the availability and reliability of
RTK solution even in the harsh environment.
Dual-frequency and multi-constellation RTK positioning solution
Support GPS, GLONASS, GALILEO, BEIDOU and QZSS
Capable of SBAS (WAAS, EGNOS, MSAS, GAGAN)
Support 135-channel GNSS
Low power consumption
Fast TTFF at low signal level
Up to 10 Hz update rate
Small form factor 10.1 x 9.7 x 2.2 mm
SMD type with stamp holes
RoHS compliant
IATF 16949 quality control
Applications:
Precision Agriculture
AGV Robotics
V2X / ETC / 5G Station
Structural / Land Monitoring
Offshore / Marine Application
Autonomous Vehicle
Micro-Mobility/E-scooter
UAV/Drone
Lawn mower
Frequency:
GPS/QZSS: L1 C/A, L5C
GLONASS: L1OF
GALILEO: E1, E5a
BEIDOU: B1I, B2a
Channels:
Support 135 channels
Update rate:
1Hz default, up to 10Hz
Sensitivity:
Tracking: -165dBm (with external LNA)
Cold start: -148dBm (with external LNA)
Acquisition Time:
Cold start 28s (typical)
RTK Convergence time: < 10s (typical; after 3D fix)
Position Accuracy (1)
Autonomous: < 1.5m CEP
RTK (2): 0.01m + 1ppm (Horizontal)
Max. Altitude. < 18,000 m
Max. Velocity: < 500m/s
Protocol Support:
NMEA 0183 ver. 4.1
115200 bps (3), 8 data bits, no parity, 1 stop bits
(default)
1Hz : GGA, GLL
RMC, 0.2Hz : GSA,GSV
Raw data:
115200 bps, RTCM V3.3, message type 1005, 1074, 1084, 1094, 1114, 1124
Note 1: Open sky, dual band, demonstrated with a good external LNA.
Note 2: CEP, 24hr static.
Note 3: Both baud rate output message rate are configurable to be factory default.
