Type A Self-Resetting Electric Differential
2 Poles 40 Amps with 30 mA ground leakage sensitivity
Recloser (4 cycles) |
|
Number of poles |
2P |
---|---|
neutral position |
Left |
[In] Rated current |
40 A |
Grounding system |
TN-S TT |
Network type |
AC |
earth leakage sensitivity |
30 mA |
device location in the system |
Exit |
Network frequency |
50 Hz |
[Ue] Nominal operating voltage |
230 V AC 50 Hz grounded neutral |
rearmament |
Earth leakage fault reset |
Test function |
Manual at > 100 V |
earth leakage protection delay |
Instant |
earth leakage protection class |
Type A |
leakage resistance |
16 kOhm when operating 8 kOhm in non-operational |
nominal closing and breaking power |
Idm 630 A 230 V |
conditional short circuit current |
Inc: 6 kA - associated with DPN, 40 A Inc: 6 kA - associated with DPNN, 40 A Inc: 10 kA - associated with iC60N, 25 A Inc: 10 kA - associated with iC60H, 25 A Inc: 10 kA - associated with iC60L, 25 A Inc: 6 kA - associated with iC60N, 40 A Inc: 6 kA - associated with iC60H, 40 A Inc: 6 kA - associated with iC60L, 40 A Inc: 10 kA - associated with NG125, 25 A Inc: 6 kA - associated with NG125, 40 A Inc: 10 kA - associated with gG fuse, 25 A Inc: 6 kA - associated with gG fuse, 40 A |
[Ui] Rated insulation voltage |
500 V |
[Uimp] Resistance to voltage spikes |
4 kV |
Control type |
Handle |
local signage |
1 green/red LED Differential device: ON/OFF signaling Recloser: ON/OFF signaling |
Operating mode |
Reduced: 10s Maximum number of consecutive restarts: 30/hour Minimum interval between 2 closures: 3 Modulating: 180 s Inverted mode Be unique Sales mode |
Insulation fault diagnosis |
If fault detected, diagnosis stopped |
Mounting type |
Permanent |
Mounting bracket |
35mm symmetrical DIN rail |
9mm steps |
6 |
Height |
106 mm |
Broad |
54 mm |
Depth |
82 mm |
Product weight |
278 g |
Color |
Grey |
Mechanical durability |
4000 open-close cycles |
Connections - terminals |
Terminal with cover35 mm² rigid Terminal with cover35 mm² flexible Terminal with cover35 mm² flexible with terminal |
length of stripped wire to connect terminals |
12 mm |
Torque |
3 N.m |
Rules |
EN 50557 |
IP protection class |
IP20 |
Electromagnetic compatibility |
Immunity to waves 8/20 µs, 250 A |
tropicalization |
2 |
RH |
95% at 55°C |
Ambient operating temperature |
-5…40 °C |
Storage ambient temperature |
-40…70 °C |