This Kit is made up of the following Viavi elements:
MTSP822-PDH-10G-DL-NOPT WITH 1/10GE E1 portable network meter with which you can perform the following measurements:
Ethernet measurements:
10/100/1000 Mb/s ELECTRICAL CONNECTION
1Gb/s OPTICAL CONNECTION via SFP
10Gb/s OPTICAL CONNECTION via SFP
PDH/SDH measurements:
E1 (2Mb/s) LOW SPEED ELECTRICAL CONNECTION
E3 (34Mb/s) HIGH SPEED ELECTRICAL CONNECTION
E4 (140Mb/s) HIGH SPEED ELECTRICAL CONNECTION
STM-1 (155Mb/s) OPTICAL CONNECTION via SFP
STM-4 (622Mb/s) OPTICAL CONNECTION via SFP
STM-16 (2.5Gb/s) OPTICAL CONNECTION via SFP
STM-64 (10Gb/s) OPTICAL CONNECTION via SFP
3 Additional transceivers that connect and enable new capabilities:
SFP 2.5G-2.7G GIGE 2G/1G FC 1310 40KM: SFP that would connect to the SFP+ port of the MTS-5800 to carry out measurements up to 1G Optical Ethernet
CSFP-622M-3-1;SFP 155M-622M 1310nm 15km IR1: SFP that would connect to the SFP+ port of the MTS-5800 to perform SDH measurements from STM-1 (155Mb/s) to STM-4 (622Mb/s) Optical
1310 SFP+ SUPPORTING 1G TO 10G CPRI: SFP that would connect to the SFP+ port of the MTS-5800 to perform measurements up to 10G Optical Ethernet