The C.A 773 VAT/DDT is an essential tool for any electrician who wishes to check the absence of voltage before any intervention in an electrical installation connected to the network.
The C.A 773 VAT/DDT, which complies with the IEC 61243-3 standard, allows intervention in any 1,000 V CAT IV installation, indoors and outdoors.
To satisfy the regulatory requirements of certain countries, there are two models equipped or not equipped with IP 2X accessories.
The C.A 773 is equipped with a backlit digital display, as a complement to the LEDs, for viewing the measurement results.
It has a redundant security system in case of power failures; the “ELV LED” flashes as soon as the voltage exceeds 50 VAC/120 VDC.
The complete self-test of the C.A 773 allows you to check the electrical circuits, the power supply, the displays and the good condition of the measurement cables.
Practical, simple and fast, the phase rotation is carried out by means of a 2-wire system with a microprocessor.
The control of the differential protection trip (DDR) is protected through the double command system; 2 hands are needed to simultaneously press the keys.
The acoustic and visual continuity complies with the recommendations of annex B of the standard. Ghost voltage detection, such as unipolar phase identification are also available.
The test lead and cable are removable. The C.A 753 measurement accessory (optional) allows you to quickly and easily control 2P+T, European and Schuko sockets.
The C.A 773 VAT/DDT is an essential tool for any electrician who wishes to check the absence of voltage before any intervention in an electrical installation connected to the network.
The C.A 773 VAT/DDT, which complies with the IEC 61243-3 standard, allows intervention in any 1,000 V CAT IV installation, indoors and outdoors.
To satisfy the regulatory requirements of certain countries, there are two models equipped or not equipped with IP 2X accessories.
The C.A 773 is equipped with a backlit digital display, as a complement to the LEDs, for viewing the measurement results.
It has a redundant security system in case of power failures; the “ELV LED” flashes as soon as the voltage exceeds 50 VAC/120 VDC.
The complete self-test of the C.A 773 allows you to check the electrical circuits, the power supply, the displays and the good condition of the measurement cables.
Practical, simple and fast, the phase rotation is carried out by means of a 2-wire system with a microprocessor.
The control of the differential protection trip (DDR) is protected through the double command system; 2 hands are needed to simultaneously press the keys.
The acoustic and visual continuity complies with the recommendations of annex B of the standard. Ghost voltage detection, such as unipolar phase identification are also available.
The test lead and cable are removable. The C.A 753 measurement accessory (optional) allows you to quickly and easily control 2P+T, European and Schuko sockets.