Anycubic Photon Mono M7 prints at speeds of up to 150 mm/h with high-speed resin and 90 mm/h with standard 3D resin, resulting in shorter wait times and cost savings.
Photon Mono M7 is equipped with a 10.1-inch 14K monochrome display, with a resolution of 13312 * 5120 and extremely fine pixels on the XY axis of 16,824.8 microns. A minimum forming diameter of 0.15 mm and a minimum exit diameter of 0.3 mm can be achieved, so the model details Exceptional.
The COB light source system combined with Fresnel lenses and front reflectors can achieve a light angle within 3° and the light uniformity is over 90%.
Anycubic LighTurbo 3.0 is also equipped with a light-fading compensation algorithm, which ensures that each layer of the model is successfully exposed and removed from the mold, improving the printing success rate.
The Photon Mono M7 resin printer features 7 intelligent sensors, detecting the platform installation status, detecting the component connection status, Waste detection, resin detection, failed print detection, release film life management, and real-time detection curves. These can reduce operating errors and increase printing efficiency.
With a footprint of 223x126x230 mm, users can easily print larger 3D models or achieve batch printing, greatly improving productivity.