Anycubic Washable Resin+ helps you save time on cleaning as well as save your budget on isopropyl alcohol. You only need water to clean your 3D prints after printing. (Being washable does not mean being safe, please wear gloves before use to avoid direct contact with skin.)
Soak the model in fresh water, rinse it or ultrasonically clean it, then dry and cure it; and recommend using Wash & Cure Machine for perfect results. (It is not recommended to pour the residual liquid directly down the drain, but rather to remove it by curing it completely or heating it to evaporate the water).
The test shows that cured models printed with Anycubic Washable Resin+ can be stored for 3 years in a natural environment without cracks. (according to ISO21207, 72 hours without any coating protection under experimental conditions is equivalent to 3 years in the natural environment). Test conditions: neutral salt (5% concentration); temp. (35°C); humidity (95%).
Due to the low shrinkage rate, printing precision is improved. Allows each model to be printed with precise details. To ensure the stable performance of the resin, please take out the model in time after cleaning to avoid deformation caused by the model soaking in water for a long time.
Anycubic Washable Resin+ has low odor and can ensure a much better printing experience for customers; Although the resin does not smell strong, we recommend keeping the interior ventilation during printing.
Compatible with 365-405nm broadband, Anycubic Washable Resin+ is suitable for most resin 3D printers on the market. You can achieve a better effect with Anycubic LCD-based SLA 3D printers.