Lubri-Limp/2 is a special lubricant for electronics in spray based on mineral oils for lubrication and protection of metals from corrosion.
Displaces moisture and prevents electrical malfunctions caused by water/liquids or their condensation.
Dielectric.
The application must be carried out in well-ventilated areas and disconnecting the equipment to be cleaned.
Spray directly on the part that you want to clean and protect, as it performs the double function of cleaning and leaving a light layer of protective lubricant. After a few minutes, the solvent will have evaporated, leaving behind the protection of the oil that does not dry or evaporate.
PRECAUTIONS FOR USE:
Due to the small amount of propellant contained in the active product, it occupies the largest net content.
PRESENTATION TYPE: Aerosol 335ml
BULK APPEARANCE: Amber liquid.
Characteristic smell.
FLASH POINT: >56º C (without propellant).
DENSITY (15ºC) 0.84-0.85
PRESSURE AT 50ºC: 9.4 bar.
SOLUBILITY IN WATER: Insoluble.
SELF-FLAMMABILITY 271º C.
VISCOSITY (40ºC) 13-20 mm2/s.
FREEZING POINT: >-6ºC