Sold out. We can let you know when it is available.
The SALICRU SPS 650 HOME+ is a 650 VA / 360 W Line-interactive uninterruptible power supply in a multi-outlet format, designed to protect computer, communications and home or office electronic equipment against mains failures, voltage fluctuations and surges.
Its Line-interactive topology incorporates a Buck/Boost AVR that corrects variations in input voltage without continuously using the battery. If the mains supply fails, the UPS transfers to battery operation in a typical 2–6 ms, with a maximum of 10 ms, providing a 230 V AC pseudo-sine-wave output.
Eight Schuko outlets are provided and all are surge protected. Six also provide battery backup, while the remaining two are intended for equipment requiring surge protection only.
The internal sealed lead-calcium AGM battery is maintenance-free and user-replaceable. Cold Start allows operation from the battery when no mains supply is present, while automatic charging operates even with the UPS switched off and automatic restart restores operation when mains power returns after the battery has been exhausted.
Status LEDs, an audible alarm, a 10 A resettable thermal breaker, removable cable organiser, non-slip feet and wall-mounting points are provided. This 650 VA version does not include USB HID communications or USB charging ports.
High-consumption equipment and loads with high inrush current should not be connected to the battery-backed outlets. Laser printers should only be connected to the surge-protected outlets.
| Model | SPS 650 HOME+ |
| Salicru reference | 693DA000001 |
| Technology | Line-interactive |
| Format | Multi-outlet power strip |
| Power rating | 650 VA / 360 W |
| Rated input voltage | 230 V AC single-phase |
| Input voltage range | 162–290 V AC |
| Rated input frequency | 50 / 60 Hz, auto-detect |
| Voltage stabiliser | AVR Buck/Boost |
| Input protection | 10 A resettable thermal breaker |
| Rated output voltage | 230 V AC single-phase |
| Voltage accuracy in battery mode | ±10% |
| Waveform in battery mode | Pseudo-sine wave |
| Output frequency | 50 / 60 Hz, same as input |
| Frequency accuracy in battery mode | ±1 Hz |
| Transfer time | 2–6 ms typ.; 10 ms max. |
| APFC load compatibility | 280 W |
| Output outlets | 8 Schuko |
| Battery-backed and surge-protected outlets | 6 |
| Surge-protected-only outlets | 2 |
| Battery | Sealed Pb-Ca AGM, maintenance-free |
| Battery configuration | 1 × 12 V / 7 Ah |
| Recharge time | 8 h to 90% charge |
| User-replaceable battery | Yes |
| Battery protection | Overcharge, deep discharge and short-circuit |
| USB HID communication | No |
| USB charger | No |
| Master-Slave function | No |
| Cold Start | Yes |
| Automatic battery charging | Yes, even when switched off |
| Automatic restart | Yes, after end of backup time |
| Protection rating | IP20 |
| Operating temperature | 0–40 °C |
| Storage temperature | −20–50 °C |
| Relative humidity | 0–90%, non-condensing |
| Maximum operating altitude | 3000 m |
| Acoustic noise at 1 m | 20 dB |
| Dimensions (depth × width × height) | 335 × 185 × 122 mm |
| Weight | 4.6 kg |
| Standards | EN-IEC 62040-1, EN 62040-2, EN 62040-3 |