Available
Mean Well LCM-40 is a constant-current LED lighting driver with a nominal power rating of 40 W. Its output current can be selected using DIP switches, allowing the driver to be matched to different LED modules and luminaires.
The output current can be set to 350, 500, 600, 700, 900 or 1050 mA. Each setting has a different output voltage range, so both the LED current requirement and the total forward voltage of the load must be checked before connection.
The factory setting is 700 mA.
Built-in dimming supports a 0–10 V DC signal, a 10 V PWM signal or resistance control. This allows the lighting level to be adjusted without changing the nominal current selected by the DIP switches.
The driver includes active power factor correction (PFC), a 12 V DC / 50 mA auxiliary output, an input for temperature compensation using an external NTC and a synchronisation function for up to 10 compatible units.
Short-circuit, overvoltage and overtemperature protection are integrated. Its Class II construction does not require a functional earth connection.
It is intended for indoor LED lighting systems requiring constant-current operation. Before installation, check the LED rated current, total forward voltage and the output voltage range corresponding to the selected current setting.
| Manufacturer | Mean Well |
| Series | LCM-40 |
| Type | Constant-current LED driver |
| Nominal power | 40 W |
| Input voltage | 180–295 V AC |
| Selectable output currents | 350 / 500 / 600 / 700 / 900 / 1050 mA |
| Factory setting | 700 mA |
| Output at 350 mA | 2–100 V DC |
| Output at 500 mA | 2–80 V DC |
| Output at 600 mA | 2–67 V DC |
| Output at 700 mA | 2–57 V DC |
| Output at 900 mA | 2–45 V DC |
| Output at 1050 mA | 2–40 V DC |
| Current tolerance | ±5 % |
| Current ripple | 5 % max. |
| Efficiency | Up to 91 % |
| Dimming | 0–10 V DC / 10 V PWM / resistance |
| Current selection | DIP switches |
| PFC | Active |
| Auxiliary output | 12 V DC / 50 mA |
| Temperature compensation | External NTC |
| Synchronisation | Up to 10 units |
| Protections | Short circuit / overvoltage / overtemperature |
| Insulation class | Class II |
| Dimensions | 123.5 × 81.5 × 23 mm |
| Application | Indoor LED lighting |