Printing technology: High-speed FDM system, with single-color or multi-color printing options via the AMS lite module.
Build volume: 256 × 256 × 256 mm, allowing for the printing of large parts in a single pass.
Layer resolution: Adjustable range from 0.05 mm to 0.3 mm for detailed or rapid prints. Dimensional accuracy of ±0.1 mm.
Print speed: Up to 500 mm/s with 10,000 mm/s² acceleration, maintaining quality through advanced motion control.
Extruder and hotend: Direct-drive extruder with hardened steel gears. All-metal hotend with a maximum temperature of 300°C, compatible with interchangeable 0.2 / 0.4 / 0.6 / 0.8 mm nozzles.
Heated bed: Heated surface up to 100°C, featuring a flexible textured PEI plate for easy adhesion and part removal. Compatible with other official plates.
Compatible materials: Optimized for PLA, PETG, TPU, and PVA. Also supports ABS, ASA, polycarbonate, and nylon, though use with these materials is not ideal due to the open-chamber design.
Uses 1.75 mm filament.
Calibration and leveling: Fully automatic. The printer self-adjusts bed leveling, nozzle height, axis resonance, and extrusion flow, eliminating the need for manual adjustments.
Sensors and safety: Filament runout and tangle detection, integrated 1080p monitoring camera, and power-loss recovery.
Noise and ventilation: Silent mode with noise levels below 48 dB, comparable to a quiet office. Smart-controlled fans for improved efficiency.
Specifications
Printing Technology: High-speed FDM system, with the option of single-color or multi-color printing thanks to the AMS lite module.
Print Volume: 256 × 256 × 256 mm, allowing large parts to be printed in a single pass.
Layer Resolution: Adjustable range from 0.05 mm to 0.3 mm for detailed or fast prints.
Dimensional accuracy of ±0.1 mm.
Printing speed: Up to 500 mm/s with acceleration of 10,000 mm/s, maintaining quality thanks to advanced motion control.
Extruder and hotend: Direct drive extruder with hardened steel gears. All-metal hotend with a maximum temperature of 300°C, compatible with interchangeable nozzles of 0.2 / 0.4 / 0.6 / 0.8 mm.
Heated bed: Heated surface up to 100°C, with a flexible textured PEI plate for easy part adhesion and removal. Compatible with other official plates.
Compatible materials: Optimized for PLA, PETG, TPU, and PVA.
It also supports ABS, ASA, polycarbonate, and nylon, although their use is not ideal due to the open chamber. It uses 1.75 mm filament.
Calibration and Leveling: Fully automatic. The printer automatically adjusts bed leveling, nozzle height, axis resonance, and extrusion flow, eliminating manual adjustments.
Sensors and Safety: Filament run-out and tangle detection, integrated 1080p camera for monitoring and resume printing after power failures.
Noise and Ventilation: Silent mode with noise below 48 dB, comparable to a quiet office. Intelligently controlled fans for greater efficiency.
Sold out. We can let you know when it is available.
