Sold out. We can let you know when it is available.
JBC NANE-2D is a precision soldering station equipped with two NT115 Nano Handles, designed for working on small electronic components, particularly in applications performed under a microscope.
The station supports two NT115 soldering handles connected to a single control unit. Their compact design and short distance between the grip and tip facilitate accurate positioning when soldering surface-mount devices (SMDs) and carrying out other precision operations.
Each tool delivers up to 14 W peak power and uses C115 series cartridges. The working temperature can be selected from 90 to 450 °C, with a specified temperature accuracy of ±3 %.
JBC Intelligent Heat Management controls heat delivery during soldering. Sleep and Hibernation modes reduce the temperature when tools remain in their stands or are not used for a period, helping to limit cartridge wear.
The station includes a tip cleaning system with an integrated brush and cleaner, cartridge holders and a cartridge exchange mechanism that allows cartridges to be replaced without directly touching the hot working area.
The control unit provides USB-A and USB-B connections for updates, PC communication and process data management. It also includes a connection for a compatible JBC FAE fume extractor or remote control, together with independent pedal connectors for each tool.
The unit is suitable for use in electrostatic discharge protected areas (ESD) and includes an equipotential bonding connection. JBC specifies a tip-to-ground resistance below 2 Ω and a tip-to-ground voltage below 2 mV RMS.
The NANE-2D configuration includes the NAE control unit, two NT115 handles, eight C115 soldering cartridges with different tip geometries and HPTE0C9SA high-precision tweezers with ESD epoxy coating for holding small components.
It is intended for manual assembly, repair and rework of high-density electronic circuits, particularly where accurate tip positioning is required. Cartridge selection and working temperature should be matched to the component, circuit and soldering process.
| Manufacturer | JBC |
| Model | NANE-2D |
| Type | Two-tool nano soldering station |
| Control unit | NAE, 2 tools |
| Supply voltage | 230 V AC |
| Supply frequency | 50/60 Hz |
| Output voltage | 8.5 V |
| Peak output power | 14 W per tool |
| Number of channels | 2 |
| Soldering tools | 2 × NT115 |
| Compatible cartridges | C115 series |
| Temperature range | 90–450 °C |
| Temperature accuracy | ±3 % |
| Thermal management | JBC Intelligent Heat Management |
| Thermal saving modes | Sleep and Hibernation |
| ESD protection | Compliant with ANSI/ESD S20.20 |
| Tip-to-ground resistance | <2 Ω |
| Tip-to-ground voltage | <2 mV RMS |
| Equipotential bonding | Yes |
| USB-A port | Firmware updates and graphics/profile management |
| USB-B port | PC communication |
| FAE/Robot connection | Compatible fume extractor or remote control |
| Pedal connectors | 1 per tool |
| Cleaning system | Integrated cleaner and brush |
| Control unit dimensions | 140 × 170 × 125 mm |
| Control unit weight | 2.47 kg |
| C115101 cartridges included | 1 |
| C115103 cartridges included | 1 |
| C115105 cartridges included | 2 |
| C115107 cartridges included | 1 |
| C115112 cartridges included | 1 |
| C115113 cartridges included | 2 |
| High-precision tweezers included | 1 × HPTE0C9SA |