Sold out. We can let you know when it is available.
Six-way Schuko power strip with active surge protection and Master/Slave control. It is designed to power and protect domestic and professional electronic equipment including computers, peripherals, network hardware and AV systems.
It operates at 230 V AC, 50/60 Hz and 10 A, with resettable overload protection and an input thermal fuse. The «PROTECTED» indicator provides a visual check that mains protection remains active.
Six child-protected Schuko sockets are provided: one Master, three Slave and two direct outlets. The Slave sockets switch on when the load on the Master socket rises above approximately 30 W and switch off below approximately 20 W.
Two USB-C ports and one USB-A port provide charging with stated USB power up to 20 W. The documentation specifies 13 kA maximum peak current, 600 J maximum energy dissipation, 10 kV open-circuit voltage and response time below 25 ns.
Surge protection is classified as Type 3 SPD. Features include an illuminated main switch, active-protection indicator, non-slip feet and wall mounting. Unlike the other models, this version has no rotating strip or cable organiser.
The housing is flame-retardant PP and the protection rating is IP20, so it is for dry environments only. The power cable is 1.4 m long and dimensions are approximately 128 × 246 × 44 mm.
It is intended to protect electronic equipment from mains disturbances and transient overvoltages; it is not intended for critical life-support or similar high-consequence applications.
