Available
The XTAR 18650-350PCM is a rechargeable 18650-format lithium-ion battery with a nominal voltage of 3.6 V and a capacity of 3500 mAh (3.5 Ah). It incorporates an electronic protection circuit (PCM) and has a raised positive terminal (button top).
The maximum continuous discharge current is 10 A. The protection circuit is intended to limit overcharging, excessive discharge, overcurrent and short-circuit conditions; it does not remove the need for a suitable charger or safe handling.
The maximum charging voltage is 4.2 V per cell. Use a charger suitable for rechargeable 3.6/3.7 V nominal lithium-ion cells with a 4.2 V end-of-charge voltage. Its approximate 69 mm length is greater than that of some unprotected 18650 cells, so check the available space before installation.
Suitable for equipment designed for protected 18650 cells and requiring up to 10 A continuous discharge, including certain torches and portable electronic devices. Observe polarity, avoid short circuits, puncturing and heating, prevent excessive discharge and dispose of the used battery through an authorised collection scheme. It is not automatically interchangeable with flat-top or unprotected 18650 cells.
| Manufacturer | XTAR |
| Model | 18650-350PCM |
| Chemistry | Lithium-ion (Li-ion), rechargeable |
| Form factor | 18650, cylindrical |
| Number of cells | 1 |
| Nominal voltage | 3.6 V |
| Nominal capacity | 3500 mAh (3.5 Ah) |
| Approximate nominal energy | 12.6 Wh (calculated: 3.6 V × 3.5 Ah) |
| Maximum continuous discharge current | 10 A |
| Maximum charging voltage | 4.2 V |
| Stated minimum discharge voltage | 2.5 V |
| Standard charging current (model-specific technical sheet) | 2 A |
| Electronic protection | Integrated PCM: overcharge, excessive discharge, overcurrent and short circuit |
| Positive terminal | Button top |
| Approximate dimensions | Ø 18.4 × 69 mm |
| Stated cycle life | Up to 800 cycles, depending on use and test conditions |
| Quantity | 1 battery |