Available
Liven Battery LV5.0-12 is a rechargeable valve-regulated lead-acid (VRLA) battery using AGM technology, intended for backup power applications and compatible equipment. Its nominal voltage is 12 V and its stated capacity is 5 Ah.
The electrolyte is absorbed in glass-fibre separators and does not require periodic water topping-up. The battery contains 6 cells connected in series.
Runtime depends on the connected load, temperature and the equipment's minimum operating voltage.
Connection uses F1/F2 terminals. Before replacement, check the voltage, dimensions, terminals, polarity and equipment's charging requirements.
Use a charger compatible with VRLA lead-acid batteries and observe terminal polarity. Avoid short circuits, overcharging and ignition sources; do not install the battery in an unventilated sealed enclosure. At end of life, take it to an authorised lead-acid battery collection facility.
The Liven LV series is designed for standby applications and uses AGM technology with gas recombination. The manufacturer states a design life of up to 5 years in float service and rates nominal capacity at the C20 rate to 1.75 V per cell.
The stated dimensions are 90 × 70 × 107 mm. The stated approximate weight is 1.6 kg.
For correct interpretation of the capacity rating: C20 to 1.75 V/cell. The stated approximate internal resistance is 35 mΩ.
| Manufacturer | Liven Battery |
| Retail reference | BA11LV512 |
| Model | LV5.0-12 |
| Technology | Lead-acid VRLA-AGM |
| Nominal voltage | 12 V |
| Number of cells | 6 |
| Nominal capacity | 5 Ah |
| Terminals | F1/F2 |
| Dimensions (L × W × H) | 90 × 70 × 107 mm |
| Approximate weight | 1,6 kg |
| Declared capacity rating conditions | C20, to 1,75 V/cell |
| Case height excluding terminals | 101 mm |
| Total height including terminals | 107 mm |
| Approximate internal resistance | 35 mΩ |