Available
Liven Battery LV2.9-12 is a rechargeable valve-regulated lead-acid (VRLA) battery using AGM technology, intended for backup power applications and compatible equipment. Its nominal voltage is 12 V and its stated capacity is 2.9 Ah.
The electrolyte is absorbed in glass-fibre separators and does not require periodic water topping-up. The battery contains 6 cells connected in series.
Runtime depends on the connected load, temperature and the equipment's minimum operating voltage.
Connection uses F1 terminals. Before replacement, check the voltage, dimensions, terminals, polarity and equipment's charging requirements.
Use a charger compatible with VRLA lead-acid batteries and observe terminal polarity. Avoid short circuits, overcharging and ignition sources; do not install the battery in an unventilated sealed enclosure. At end of life, take it to an authorised lead-acid battery collection facility.
The Liven LV series is designed for standby applications and uses AGM technology with gas recombination. The manufacturer states a design life of up to 5 years in float service and rates nominal capacity at the C20 rate to 1.75 V per cell.
The stated dimensions are 80 × 56 × 105 mm. The stated approximate weight is 1.1 kg.
For correct interpretation of the capacity rating: C20 to 1.75 V/cell. The stated approximate internal resistance is 45 mΩ.
| Manufacturer | Liven Battery |
| Retail reference | BA11LV2912 |
| Model | LV2.9-12 |
| Technology | Lead-acid VRLA-AGM |
| Nominal voltage | 12 V |
| Number of cells | 6 |
| Nominal capacity | 2,9 Ah |
| Terminals | F1 |
| Dimensions (L × W × H) | 80 × 56 × 105 mm |
| Approximate weight | 1,1 kg |
| Declared capacity rating conditions | C20, to 1,75 V/cell |
| Case height excluding terminals | 99 mm |
| Total height including terminals | 105 mm |
| Approximate internal resistance | 45 mΩ |