Sold out. We can let you know when it is available.
Enix Power Solutions AMP90106 is a rechargeable valve-regulated lead-acid (VRLA) battery using AGM technology, intended for backup power applications and compatible equipment. Its nominal voltage is 12 V and its stated capacity is 9 Ah.
The electrolyte is absorbed in glass-fibre separators and does not require periodic water topping-up. The battery contains 6 cells connected in series.
Runtime depends on the connected load, temperature and the equipment's minimum operating voltage.
Connection uses F6.35 terminals. Before replacement, check the voltage, dimensions, terminals, polarity and equipment's charging requirements.
Use a charger compatible with VRLA lead-acid batteries and observe terminal polarity. Avoid short circuits, overcharging and ignition sources; do not install the battery in an unventilated sealed enclosure. At end of life, take it to an authorised lead-acid battery collection facility.
The manufacturer identifies this specific battery by its catalogue part number. Operating duty and terminal arrangement must match that part number rather than capacity alone.
The stated dimensions are 151 × 65 × 94 mm.
For correct interpretation of the capacity rating: Nominal C20 capacity, Enix catalogue.
| Manufacturer | Enix Power Solutions |
| Retail reference | BA11709 |
| Model | AMP90106 |
| Technology | Lead-acid VRLA-AGM |
| Nominal voltage | 12 V |
| Number of cells | 6 |
| Nominal capacity | 9 Ah |
| Terminals | F6.35 |
| Dimensions (L × W × H) | 151 × 65 × 94 mm |
| Declared capacity rating conditions | Nominal capacity C20, according to the catalogue Enix |
| Intended duty | Alta descarga para SAI |
| Terminal polarity (Enix catalogue) | + / - |
BA11712