Single-phase, control and isolation transformers
2500 VA
They have 11 voltage inputs so they can be adapted within an input voltage range between 208V and 550V
The output has two 115V secondaries, so they can be configured as 115V, 2x115V or 230V
For all this they are usually used for export equipment, being able to configure with a few simple jumpers the input of the equipment to the network voltage of the place of destination of the equipment.
UL certification
Insulation class T 40/B
Other voltages on request .
Input voltage 208, 230, 380, 400, 420, 440, 460, 480, 500, 525, 550 V AC
Incoming current: 363 A (208 V AC); 137 A (550 V AC)
Short-circuit current: 670 A (208 V AC); 254 A (550 V AC)
Inrush current: 12.5 A (208 V AC); 4.72 A (550 V AC)
Frequency 50...60 Hz
Standards EN 61558-1, EN 61558-2-4, EN 62041 category 0
Test and insulation voltage 4 kV (prim./sec.)
Mode Mounting bracket Fixing slot
Dimensions H×W×D: 200×195×217 mm
Fixing dimensions a×b×c 130×150×10 mm
Hole Ø 7×11 mm
Temperature range -20... +40 ºC (storage temp. -20...+80 ºC)
Output voltage 1 × 230, 1 × 115, 2 × 115 V AC
Output power 2500 VA