universal AC input / full range
protection against: short circuit / overload / overvoltage
cooling: free air convection
can be installed on DIN rail TS-35/7.5 or 15
isolation class II
LED indicator for power on
100% full load burn-in test
3 years warranty
for professional use only
This Device must be installed by a qualified person.
output:
DC voltage: 24 V
rated Current: 1.5 A
Current range: 0-1.5 A
rated power: 36 W
ripple & noise (max.): 150 mVp-p
voltage adj. range: 21.6-26.4 V
voltage tolerance: ± 1.0 %
line regulation: ± 1.0 %
load regulation: ± 1.0 %
setup, rise time: 100 ms, 30 ms / 230 VAC 100 ms, 30 ms / 115 VAC at full load
hold up time (typ.): 100 ms / 230 VAC 21 ms / 115 VAC at full load
input:
voltage range: 85-264 VAC 120-370 VDC
frequency range: 47-63 Hz
efficiency (typ.): 83 %
AC Current (typ.): 0.88 A / 115 VAC 0.48 A / 230 VAC
inrush Current (typ.): cold start 15 A / 115 VAC 3 0A / 230 VAC
protection:
overload:
105-160% rated output power
protection type: constant Current limiting, recovers automatically after fault condition is removed
overvoltage:
27.6-32.4V
protection type: shut down output voltage, re-power on to recover
environment:
operating temperature: -20 to +60°C
operating humidity: 0-90% RH non-condensing
storage: -40 to +85 °C, 10-95 % RH
temperature coefficient: ± 0.03 %/°C (0-50 °C)
vibration: 10-500Hz, 2G 10 min / 1 cycle, period for 60 min each along X, Y, Z axes, mounting: compliance to IEC60068-2-6
safety & EMC:
safety standards: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
withstand voltage: input to output: 3 kVAC
isolation resistance: input to output:100 Mohm / 500 VDC / 25 °C / 70 % RH
EMC emission: compliance to EN55011, EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC immunity: compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
other:
MTBF: min. 441,500 h, MIL-HDBK-217F (25 °C)
dimensions: 78 x 93 x 56 mm
packing: 0.27 kg, 48 pcs / 14 kg / 1.02 ft³