This new professional digital clamp meter for measurements up to 1000 A AC/DC offers a wide range of functions and is particularly impressive through the rugged, rubberized and ergonomically shaped case that ensures safe handling during the measurement and is also suitable for use in the industrial sector.
The PeakTech 1670 supplies additional features such as the ability to determine two temperatures at the same time, the direct current measurement in µA range, and the Bluetooth interface for recording data on a mobile phone, laptop or tablet.
Due to these outstanding features, these devices are the ideal companion for every service technician.
4 4/5-digit LCD-display (max. 50000)
True RMS measurement
Max. conductor size: 48 mm
NEW: Bluetooth 4.0 Interface and new App for Android
Simultaneous temperature measurement of two sources of heat by using two Type-K temperature probes
LED flashlight for measured field lighting
Non Contact Voltage Detector
MIN/MAX
DATA-hold
Relative measurement
Diodes and continuity test
Auto-Power-Off and low battery indication
Safety: EN-61010-1
Current Clamp: CAT III 1000 V / CAT IV 600 V
Multimeter Part: CAT II 1000 V / CAT III 600 V
TÜV/GS-approved: TÜV Rheinland
Accessories: Software CD, carrying case, test leads, type K temperature probes, battery and manual
DCV: 500 mV/5/50/500/1000 V; 0,01 mV; +/- 0,1% + 3 dgt.
ACV: 500 mV/5/50/500/1000 V; 0,1 mV; +/- 1,0% + 30 dgt.
DCA: 50/1000 A; 0,01 A; +/- 2,5% + 5 dgt.
ACA: 50/1000 A; 0,01 A; +/- 2,5% + 5 dgt.
µA Direct Measuring: 500/5000 µA; 0,01 µA;+/- 1% + 6 dgt.
Ohm: 500 Ohmios/5/50/500 kOhmios/5/50 MOhmios; 0,01 Ohmios; +/- 1,0% + 5 dgt.
Temperature: -100 … +1000°C; 0,1°C; +/- 1,0% + 2,5°C
Capacitance: 50/500 nF/5/50/500 µF/5 mF; 0,01 nF; +/- 3,5% + 10 dgt.
Frecuency: 50 Hz - 10 MHz; 1 mHz; +/- 0,3% + 2 dgt.
Protection: IP30
Dimensions:76 x 230 x 40 mm
Weight: 315 g