LowZ - TrueRms
The P 1700 fork clamp meter is used for current measurement on devices and systems. The fork-shaped opening of the device enables the user to carry out a quick and effective current measurement in areas that are difficult to access. Examples of this are measurements on terminal blocks in control cabinets or individual wires / lines on electrical devices.
With features such as voltage measurement, resistance measurement, diode measurement, capacitance measurement and continuity test, the PeakTech 1700 can cover the most important areas of common electrical measurements and convince with its accuracy.
Thanks to the modern inverted and illuminated LCD display, it is possible to carry out the required measurements without problems, even in darker places. Furthermore, the integrated LED supports the measuring process by illuminating the surroundings.
The modern P 1700 stands out with its complete lighting, the display of all function keys and the function labeling.
Because of these outstanding features, these devices are the ideal companion for every service technician and electrical installer.
Due to these outstanding features, these devices are the ideal companion for every service technician.
3 5/6 digit inverted LCD display (max. 6000)
True RMS measurement (True RMS)
Conductor diameter: 16 mm max.
LowZ low impedance measurement
AutoSense function: Automatic DC or AC voltage selection
Full button and rotary switch illumination
LED flashlight for measuring point lighting
Non-contact voltage detector
Minimum, maximum value holding function
DATA-HOLD measurement hold function
Diode and continuity test function
Automatic switch-off and battery status display
Safety: EN61010-1; CAT III 1000 V / CAT IV 600V
Accessories: bag, test leads, batteries and operating instructions
DCV: 6/60/600/1000 V; 0,001 V; +/- 1,5% + 2 dgt
ACV: 6/60/600/1000 V; 0,001 V; +/- 1,5% + 2 dtg.
ACA: 0 ... 200 A; 0,1 A; +/- 3,0% + 5 dgt.
Ohm: 600 Ω/6/60/600 kΩ/6/60 MΩ; 0,1 Ω; +/- 1,0% + 4 dtg.
Capacitance: 60/600 nF/6/60/600 µF/4 mF; 0,01 nF; +/- 3,0% + 5dgt.
Dimensions: (WxHxD) 64 x 230 x 43 mm
Weight: 230 g