Quantity | ||
---|---|---|
Solid IP67 casing, resistant to shocks, UV rays and high temperatures
WiFi communication, 3G-UMTS/GPRS, LAN (Ethernet network), Bluetooth and USB
Self-powered by its voltage inputs of up to 1,000 V
Continuous recording with a step of 200 ms
Measurements according to IEEE 1459 standard
4 voltage inputs and 4 current inputs
Adapted for installation on an electric pole
The PEL106 power logger measures and records all the useful data for a diagnosis of energy consumption. The PEL106 can be used without interrupting the power supply.
Robust thanks to its IP67 off-road housing, the PEL106 can be transported anywhere. It consists of 4 voltage channels and 4 current channels.
There are no more battery problems, this logger is self-powered directly by the phase. The LCD screen with backlight, equipped with a quadruple digital display, is very easy to read. The PEL106 is equipped with an SD/SD-HC card to back up data for several months or even years.
Adapted to any type of electrical network, the PEL106 automatically recognizes the connected sensors. It also measures voltage up to 1,000 VAC/VDC, current up to 10 kACA/5kDC. Its wide measurement ranges allow the recording of energy up to 10 GW/Gvar/GVA, and energies of 4 EWh/EVAh/Evarh. It has an “Alarm” mode. The user configures the limits and a list of events is saved.
Associated with L452 loggers remotely, the PEL106 can record external parameters (up to 2x8 channels) such as temperature, pressure, motor torque, and thus, it allows fine-tuning the analysis in case of fault finding, for example. This function of the PEL106 allows applications in the new energy sector such as wind power (electric energy associated with the force of the wind).
The PEL106 is equipped with multiple communication modes: USB, Ethernet, Bluetooth, WiFi and 3G/ GPRS. The new 3G/GPRS mode allows the user to insert a SIM card into the PEL, in order to connect remotely with a GSM 3G connection. During an alarm, the user can automatically receive an email. When access to the PEL106 is complex due to protections in secure computer networks, the measurements can be consulted through an IRD server.
The PEL Transfer software allows data recorded with the PEL100 to be analyzed. Based on the power measurement campaigns carried out, the software automatically breaks down the losses detected.
The software directly calculates the cost of the power consumed and gives the result in the selected local currency. The DATAVIEW software platform generates reports automatically. The user has the possibility of configuring alarm thresholds in the different measurements carried out, in order to obtain a personalized measurement report.
Acquisition speed from 200 ms
Voltages, Currents
Active, apparent, reactive power
Phase: cos phi, tan PHI, PF
THD Harmonics
IP67 closed, IP54 open