Stock | Quantity | |
---|---|---|
20 |
Lubri-Limp/0 is a dielectric contact cleaner spray based on Isopropyl Alcohol, whose evaporation is rapid and total, leaving no residue (ZERO residue).
Because Isopropanol is flammable and, especially when sprayed, equipment should be disconnected and kept away from any ignition source. Once the product has evaporated, the equipment can be reconnected.
It should be used in well-ventilated areas and electrostatic accumulation should be avoided.
For stubborn dirt, a first application is advisable to soften the stuck-on dirt, allow the product to act for a few seconds and spray a second time and let the pressure of the spray drag the dirt away.
In photography, do not apply to plastic lenses or optics. If in doubt, consult the manufacturer of the optical material to be cleaned.
In printing equipment, it removes dirt and ink residue from rubber rollers and their mechanisms.
PRECAUTIONS FOR USE:
Due to the small amount of propellant contained in the active product, it occupies the largest net quantity.
TYPE OF PRESENTATION: Aerosol 210 ml
BULK APPEARANCE: Colorless liquid.
Characteristic odor.
DISTILLATION RANGE: 82-83 ºC
FLASH POINT: 10º C (without propellant).
DENSITY (15ºC) 0.785 g/cm3.
PRESSURE AT 50ºC: 7.3 bars.
SOLUBILITY IN WATER: Completely soluble.
AUTO-INFLAMMABILITY 271º C.
VISCOSITY (40ºC) 2.5 m Pa.s at 20ºC.
PURITY: 99.8%